Sew It Is Online Catalog with secure transactions

Quilting Notions



Creative Grids 60 Degree Diamond Ruler
Increase your diamond design possibilities with the 60 degree Diamond Ruler. Cut 60 degree diamonds up to 8 1/2 inches; hexies up to 8-1/2 inches; and 60 degree triangles up to 8-1/2 inches. Maximize the design potential by cutting them from strip sets. There are even markings included to cut 120 degree side setting triangles. The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! It comes with fully illustrated step by step instructions or scan the QR Code printed on the instructions to view a video demonstration. Creative Grids
Quantity on Hand: 1 ea

    Larger Image

Ref # cg60degreediamondruler      $30.00 ea         Quantity:  




Water Soluble Glue Pen Blue
This clever glue stick means the end of sewing around pins! Water-soluble glue that dries clear. A quick, convenient way to hold fabrics for sewing or positioning pieces. Blue glue dries clear. Includes 1 refill glue tube. Acid-Free. Sew Line
Quantity on Hand: 2 ea

    Larger Image

Ref # gluepen      $7.95 ea         Quantity:  




Creative Grids Charming Itty Bitty Eights 5in x 15in Quilt Ruler

This easy to manipulate 5in x 15in Charming Itty Bitty Eights Ruler designed by Lisa Bongean of Primitive Gatherings is the perfect size to cut 5in charm squares quickly and easily. The dashed one inch markings increase visibility - which improves accuracy. The ruler highlights the 1/8in markings which are hard to use on traditional rulers. The black and white dashed 1/8in markings show on both light and dark fabrics and ensure accuracy when cutting pieces for miniature quilts. Refer to the black diamonds when cutting 1/8" units; the white diamonds when cutting 1/4in units.

The 3/16in marking printed along the length of each side of the ruler are the perfect width for cutting wool bias strips for applique. One is white and one is black. Choose the line that shows best on your chosen fabric.

The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts! # CGRPRG3

Quantity on Hand: 2 ea

    Larger Image

Ref # ittybiityeights5x15ruler      $25.99 ea         Quantity:  




Sew Hot Iron Rest
This heavy duty silicone iron rest in a minty fresh hue allows you to place your iron plate directly on the surface, so you can press on without it tipping over. The generous 7in x 10-3/4in size will fit most home irons, and it can withstand up to 500 degree F (260 degree C).
Quantity on Hand: 2 ea

    Larger Image

Ref # sewhotironrest      $11.00 ea         Quantity:  






Fan Throw Quilt (with15-degree Stack-n Whack ruler)
Use this ruler to cut 15 degree fan wedges for 5" to 12" six-blade fans blocks. Try it for Stack-n-Whack® kaleidoscope fans, as well as for scrap fans and other variations. Illustrations show strip cutting, scrap, and selective cutting methods, plus instructions for finishing the fan blocks with fabric trim and simple straight-stitch applique. Instructions included for this 48" x 65" throw quilt .
Sale--was 12.00
Quantity on Hand: 2 ea

    Larger Image

Ref # stacknwhack15fanruler      $10.00 ea         Quantity:  




Studio 180 Four Patch Square Up Tool

Four Patches, basic units that seem so simple to make. Just stitch 4 squares together, either individually or with strip piecing and you’re good to go. But anyone who has attempted these units knows that they are notoriously difficult to make perfectly. Either the unit size isn’t quite right, the edges just don’t quite line up, or they’re just not quite square. Ugh. Even experienced stitchers encounter these problems.

The Four Patch Square Up© Tool is the solution. Like all the Studio 180 Design rulers and processes, this tool and technique will have you build your units slightly oversized and then quickly trim them to perfect shapes. The Four Patch Square Up© Tool is designed to work with units that finish to whole or half inch increments, from ½” finished up to 6” finished unit sizes. The tool’s perfectly engineered lines are designed to quickly locate and align with the unit center and the sewn seams, allowing for easy trimming on all four sides. The accuracy is amazing!

Your units will be the correct size. They will have seams properly positioned. And they will have edges that are straight , even, and square. No more guess work! So jump in and give it a try, you will be absolutely thrilled with the results.
Ruler Size: approx. 7" x 13"
Twelve size options from ½" to 6" finished units in ½" increments
Step by step illustrated instructions, available to download
Instructions for left hand cutting and trimming
Fine lines for higher accuracy
Quantity on Hand: 1 ea

    Larger Image

Ref # studio180fourpatchtool      $23.50 ea         Quantity:  




Wedge Star
The Wedge Star tool is sure to be an exciting addition to your quilting toolbox! Designed to make a variety of different blocks based on 45º sub-units, ranging from simple kaleidoscope blocks to complex stars with diamond points going north, south, east and west. And with 22 different size options and the ability to swap sub-units in and out of blocks, you’ll be able to create virtually unlimited designs. This is a tool guaranteed to keep your creativity flowing, project after project!

As an added benefit, we’ve also included a free bonus project, Freelancer, in the Wedge Star’s instruction set. And with all the possibilities the Wedge Star™ tool offers, this project can truly be yours; just change the size and coloring to make a spectacular project as unique as you are. The quilt size and fabric yardage will, of course, depend on the size blocks you choose.
22 block size options: 3” to 24” finished blocks
Complete step by step illustrated instructions
Left hand cutting illustrated instructions
Free online video demonstration (coming soon!)
Free bonus wall hanging project: Freelancer
Charts to help determine fabric requirements for future projects
Fine lines for higher accuracy
Quantity on Hand: 3 ea

    Larger Image

Ref # wedgestar_jpg      $39.75 ea         Quantity:  




Studio 180 V Block Tool

This tool is a must have if you like making quilts with these tall star point units. Sometimes known as “Peaky and Spike”, a nickname attached to the unit about 20 years ago by a famous quilter, Doreen Speckman, this particular shape has perplexed quilters forever. With Deb’s tool, which you can see used on our free online video demonstration (see below, also on YouTube), you’ll be cutting the center and side triangles slightly over sized and then with the same tool trimming the sewn piece to an extremely precise unit with seams perfectly placed for crisp, sharp points at every intersection. So think about adding this magnificent new tool to your toolbox, you’ll be glad you did.

DETAILS
Ruler size: approximately 7” x 11”
Eleven unit size options from 1” finished units to 6” finished units in half inch increments
Step by step illustrated instructions, available to download
Illustrated instructions for left hand cutting and trimming
Fine lines for higher accuracy
Free online video for unit construction and tool trim down (see below, also on YouTube)
Numerous companion patterns available
Quantity on Hand: 1 ea

    Larger Image

Ref # studio180vblock      $22.50 ea         Quantity:  




Studio 180 Wing Clipper
The Wing Clipper is a must have tool if you are making Flying Geese units for your quilt. This tool, and the associated Fast Flying Geese construction technique, allow you to make four finished units from five squares. The best part is that each unit is constructed slightly oversized so each can be trimmed to a perfect size with perfect seam placement once the sewing and pressing are complete by using the Wing Clipper tool. You can see the tool in action on our free online video demonstration below. Every single unit will be exactly right every time. Now who ever thought that would happen with Flying Geese units?!?!

DETAILS
Ruler size: 5½” x 10½”
Ten unit sizes from ½” x 1” finished units to 5” x 10” finished units
Note all sizes on this ruler are based on heights that finish to ½” or whole inch.
Also the heights increase in half inch increments.
Step by step illustrated instructions, available to download
Instructions and illustrations for left hand trimming
Chart for easy conversions of other patterns and designs
Fine lines for higher accuracy
Free online videos for constructions and trim down techniques (see below, also on YouTube)
Numerous companion patterns available
Quantity on Hand: 1 ea

    Larger Image

Ref # studio180wingclipper      $22.50 ea         Quantity:  




Studio 180 Tucker Trimmer Tool
The Tucker Trimmer tool was designed to help quilter’s quickly and easily trim down units that are made with triangles: half square triangle squares, quarter square triangle squares (hourglass units), and combinations of half square and quarter square triangle squares (combination units). It has multiple diagonals which allow you to align ruler guide lines with unit seam lines to quickly locate the exact center of pieced units. This makes trim down easy,precise, and perfect every time. No more figuring, or guessing, or struggling to find a center point, and you can see it demonstrated on our free online video demo. I use it for much more than just trimming however and consider it my “must have” tool every time I head to my cutting table.
Ruler size: 7” x 7”
Eleven unit size options from 1” finished to 6” finished in half inch increments (trim sizes 1½” to 6½”)
Step by step illustrated instructions for making half square triangle, hourglass, and combination units. Now available to download!
Instructions and illustrations for left hand trimming
Charts for easy conversion of other pattern instructions
Free online videos for unit construction and tool trim down (see below, also on YouTube)
Free bonus block pattern
Numerous companion patterns available
Quantity on Hand: 1 ea

    Larger Image

Ref # studio180tuckertrimmer      $22.50 ea         Quantity:  






Braided Twist- Ruler with Book
Try this unique technique for a quick tablerunner with no quilting, no hand sewing, and no binding. The beauty of the Braided Twist is its simplicity! The Braided Twist tool includes a 32 page booklet and three insert pages. The main project runner size is 13-1/2in x 33-1/2in. Longer and shorter variations are included. The Bonus Blossom project is 30in in diameter.
Sale--was 30.00
Quantity on Hand: 2 ea

    Larger Image

Ref # braidedtwist      $25.00 ea         Quantity:  




Studio 180 Quilters Magic Wand
The Quilter’s Magic Wand is an accurate ½” wide ruler with an etched line running down the middle. Use it for marking or measuring when high precision is required. It is especially useful for marking those diagonal seam lines when using the Tucker Trimmer and Wing Clipper lines of tools. It comes in 8 different colors, one to match everyone’s sewing room!

DETAILS
Rule size - ½” x 12”
Used with Tucker Trimmer and Wing Clipper tools
8 different colors – Lime, Hot Pink, Beige/Champagne, Yellow, Orange, Blue, Plum/Light Pink, and Dark Violet
Free online video for constructions and trim down techniques (see below, also on YouTube)
Quantity on Hand: 1

    Larger Image

Ref # studio180quiltersmagicwand      $5.95           Quantity:  




Creative Grids Quilting Ruler 2 1/2 in Square

Easy-to-read black & white markings. 1in grid with 1/8in & 1/4in increments. Use numerical white dots and 1/4in grip sides to cut whole inches. Turn-a-Round to use the 1/2in grip side & numerical black dots to add the seam allowance. Gripper holds fabric while cutting. Exclusive line. CGR2



Quantity on Hand: 2 ea

    Larger Image

Ref # 2_5ruler      $7.50 ea         Quantity:  




Creative Grids Itty-Bitty Eights Square Ruler 6in x 6in
This 6 inch Itty Bitty Eights Square Ruler designed by Lisa Bongean of Primitive Gatherings features easy to read 1/8 inch markings.

The black and white dashed eighth inch markings show on both light and dark fabrics. The dashed 1 inch grid lines ensure accuracy when cutting pieces for miniature quilts.

Refer to the black diamonds when cutting 1/8 inch strips; the white diamonds when cutting 1/4 inch increments.

The template slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!
Quantity on Hand: 1 ea

    Larger Image

Ref # creativegridsittybittyeightssq6x6      $15.95 ea         Quantity:  




Creative Grids Quilting Ruler 5 1/2in Square
Easy-to-read black & white markings. 1in grid with 1/8in & 1/4in increments. Use numerical white dots & 1/4in grip sides to cut whole inches. Turn-a-Round to use the 1/2in grip side & numerical black dots to add the seam allowance. Gripper holds fabric while cutting. Exclusive line CGR5
Quantity on Hand: 1 ea

    Larger Image

Ref # 5_5ruler      $12.45 ea         Quantity:  




Creative Grids Quilting Ruler 7 1/2in Square

Easy-to-read black & white markings. 1in grid with 1/8in & 1/4in increments. Use numerical white dots & 1/4in grip sides to cut whole inches. Tun-a-Round to use the 1/2in grip side & numerical black dots to add the seam allowance. Gripper holds fabric while cutting. Exclusive line CGR7
Quantity on Hand: 1 ea

    Larger Image

Ref # 7_5ruler      $14.50 ea         Quantity:  




Creative Grids Quilting Ruler 6 1/2in Square
Easy-to-read black & white markings. 1in grid with 1/8in & 1/4in increments. Use numerical white dots & 1/4in grip sides to cut whole inches. Turn-a-Round to use the 1/2in grip side & numerical black dots to add the seam allowance. Gripper holds fabric while cutting. Exclusive line. CGR6


Quantity on Hand: 0 ea

    Larger Image

Ref # 6_5squareruler      $13.50 ea         Quantity:  




Creative Grids 3.5 inch Square Ruler

Easy-to-read black & white markings. 1in grid with 1/8in and 1/4in increments. Includes 90 degree angle. Turn-a-Round feature. Embedded Gripper Dots hold fabric while cutting. Exceptional quality. Exclusive line. Independents Only. Made in the USA.


Quantity on Hand: 1 ea

    Larger Image

Ref # 3_5ruler      $8.50 ea         Quantity:  




Creative Grids Quilting Ruler 9 1/2in Square

Easy-to-read black & white markings. 1in grid with 1/8in & 1/4in increments.Use numerical white dots & 1/4in grip sides to cut whole inches. Turn-a-Round to use the 1/2in grip side & numerical black dots to add the seam allowance. Gripper holds fabric while cutting. Exclusive line.CGR9


Quantity on Hand: 1 ea

    Larger Image

Ref # 9_5ruler      $19.50 ea         Quantity:  




Strip Tube Junior
Junior has all the talents and magic of the original Strip Tube Ruler #CQD05001, but comes in a smaller, more convenient size. Junior is perfect for making blocks 6-1/2in or smaller. Junior is also wonderful for squaring up any blocks that have a diagonal seam with just one cut.
Quantity on Hand: 3 ea

    Larger Image

Ref # striptubejunior      $15.95 ea         Quantity:  




Creative Grids 60 Degree Triangle 8-1/2in
Cut 30° and 60° angles up to a height of 8in. Instructions included. Easy-to-read black markings every 1/4in. Embedded Gripper Dots hold fabric while cutting. Exclusive line. Independents only. Made in the USA
Quantity on Hand: 1 ea

    Larger Image

Ref # 60degreetriangle8_5      $24.45 ea         Quantity:  




Creative Grids Quilting Ruler 4 1/2in Square
Easy-to-read black & white markings. 1in grid with 1/8in & 1/4in increments. Use numerical white dots and 1/4in grip sides to cut whole inches. Turn-a-Round to use the 1/2in grip side & numerical black dots to add the seam allowance. Gripper holds fabric while cutting. Exclusive line. CGR4


Quantity on Hand: 1 ea

    Larger Image

Ref # 4_5ruler      $9.50 ea         Quantity:  




Strip Tube Ruler
Cozy Quilt Designs
Quantity on Hand: 1 ea

    Larger Image

Ref # striptuberuler      $19.95 ea         Quantity:  




Mini Companion Angle

Quantity on Hand: 3 ea

    Larger Image

Ref # minicompanionangle      $5.00 ea         Quantity:  




Creative Grids Sidekick Ruler
Cut 3 shapes in 4 sizes all from strips using the Sidekick Ruler. Cut diamonds, 60 degree triangles, and half triangles. Comes with full color instructions. Jaybird Quilts
Quantity on Hand: 1 ea

    Larger Image

Ref # sidekickruler      $17.95 ea         Quantity:  




Creative Grids Cat's Cradle Tool Quilt Ruler
Make Cats Cradle units quickly, easily and accurately, two at a time from squares and rectangles. You never cut a single triangle, but with the Cats Cradle tool you end up with perfect triangles in your finished blocks every time.

Create six sizes from 1 1/2 to 4 inch finished blocks - the cutting requirements for each is printed right on the ruler!

The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!

The ruler comes with fully illustrated step by step instructions or scan the QR Code printed on the ruler to view a video demonstration.

Quantity on Hand: 1 ea

    Larger Image

Ref # catscradle      $20.00 ea         Quantity:  




Privacy Policy
Questions? Email us at questions@sewitis.com
Home

Web Site Programming by Key to the Web, LLC © 2019-2019